ESI MoCo Replacement Master Volume Knob
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy to print, easy to install!
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 6
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
When I had ordered the ESI MoCo, the knob was sticky due to it being coated with rubber during manufacturing but started dissolving due to high temperatures during summer. To counter this flaw, I have modelled a very close copy of the knob to make it easier for those who wish to use the ESI MoCo without having to use the original volume knob because of the coating's issue.
I've used PETG for a more durable material as PLA degrades over time. This replacement knob can be printed with both a 0.2mm nozzle and a 0.4mm nozzle.
Adhesion: No
Support: No
Material: PETG
Infill: 100%, Concentric
Resolution: 0.2mm
Check it out also on Maker World: https://makerworld.com/en/models/3510495-esi-moco-replacement-master-volume-knob#profileId-4011361