Workshop Cradle (Fanttik E2 Pro)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quick access cradle with magnetic tray for driver. Magnetic inserts in cradle for mounting while in use.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 44
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I found the shipped cylindrical sleeve for the Fanttik E2 Pro to be cumbersome and difficult to manage in a busy workshop. It likes to roll around and takes longer to access the driver and is awkward space-management wise.
I designed this simple cradle that the bit holder cylinder snaps into, and magnetically holds the driver in a quick, easy to access cradle outside of the cylinder.
________________________________________________________________________________________________________________________________
Magnets - N52 Neodymium
Driver Cradle: 1" x 1/4" x 1/8" flat rectangular x 2
Housing; 5/8" x 5/8" x 1/8" flat square x 6
Double check your magnet sizes with the model and Boolean as necessary - High strength recommended especially if you plan to mount in peculiar positions, assuming you know what happens if the bit cylinder falls.