1 / 5
Prusa i3 mk2 igus bearing mounts for x and z axis — zdjęcie 1
1 / 5

Prusa i3 mk2 igus bearing mounts for x and z axis

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I hate roller bearings so i swapped to igus 8mm on my prusa i3 mk2. (PS i notised an error in the STL file for the…

Ocena
0 / 5
Polubienia
0
Pobrania
54
Wydruki
0
Wyświetlenia
642
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

I hate roller bearings so i swapped to igus 8mm on my prusa i3 mk2.

(PS i notised an error in the STL file for the motor mount so i upploaded a new version 26.01.17)

its important to get the pre loaded aluminium enosed bearings or it wont work properly, these bearings are slightly bigger.

To make it work print these new bearing mounts that will take the igus 8mm bearings RJZM-01-08.

I also redused the holes for the drive skrew connection so you can use a 3mm wood skrew to attach it in stead of the fidgety thing for the original mount

PS: Use flat top skrews of the drive skrew might missaligne.

Category: 3D Printer Accessories

Tagi