Snowflake Hexagon Lantern for LED Tealights

A six-sided winter lantern for battery LED tealights. Each icy-blue face has a large snowflake window cut through it, with a smaller snowflake above or below that alternates from face to face. Inside, a thin pearl-white sleeve stands just behind the windows and diffuses the light, so when the tealight is on the snowflakes glow soft white against the blue. During the day the white still shows through, which keeps the two-tone look.

It comes as three simple parts that stack together without glue:

Shell (icy blue #7EC8E3): a hexagonal tube with 6 large and 6 small through-cut snowflake windows

Diffuser sleeve (pearl white #F2EFE6): a 1.2 mm round tube that sits in a locating groove, so it stays centred

Base (pearl white #F2EFE6): a hexagonal foot with a socket for the shell and a shallow pocket that keeps a standard tealight centred

Lift the shell and sleeve off to switch the tealight on or off. The design is plain, with no text or logos.

Dimensions (measured from the model, mm):

Assembled: 101.6 x 88.0 x 116.0 (base across corners x base across flats x total height), about 4.0 x 3.5 x 4.6 in

Shell: 80.0 across flats, 92.4 across corners, 110.0 tall, 2.4 wall

Large snowflake windows 36.0 x 31.7, small windows 14.0 x 12.1, arm width 2.8

Sleeve: OD 74.0 / ID 71.6, 110.0 tall

Base: 88.0 across flats, 10.0 tall, 3.0 bottom; tealight pocket Ø39.5 x 3.0 deep (fits standard Ø38 LED tealights)

Fits: shell in socket 0.3 per side, sleeve in groove 0.3 per side, sleeve to shell 0.6 per side; 113 mm clear height inside

Print settings (Bambu Studio slice for a Bambu Lab H2D, PLA, 0.20 mm Standard profile):

All 3 parts fit on one plate and print upright with no supports

About 6h15m and 162 g total (shell 87.2 g + base and sleeve 74.8 g)

Safety: use battery LED tealights only. PLA is not heat-resistant, so never use an open flame. Not a toy.

Images are renders / AI rendering (usage scene), not printed photos.