1 / 6
Stabilising 12 mm top rail with 12 mm bearings for spring loaded Creatr exstruder -V6 final — zdjęcie 1
1 / 6

Stabilising 12 mm top rail with 12 mm bearings for spring loaded Creatr exstruder -V6 final

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

After seeing how much the original setup vibrates during printing. I made a version of this for my Spring loaded…

Ocena
0 / 5
Polubienia
1
Pobrania
8
Wydruki
0
Wyświetlenia
144
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Share Alike

After seeing how much the original setup vibrates during printing.

I made a version of this for my Spring loaded exstruder.

Its made a big difference on the quality of the prints, i no longer get a seam on small sylinders and items generally come out much much smoother.

There are now 2 versions of this, one with the cables coming in in front and one that is structured to receive the cable feed in the back.

Instructions

THis only works together with the spring loaded ekstruder, you have to download the side holders from extra Bendit-ed 12 mm guide rod for leapfrog creatr. http://www.thingiverse.com/thing:209408

Category: 3D Printing

Tagi