1 / 4
Yongnuo YN360 feet — 45° stands
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two PLA feet for a Yongnuo YN360 RGB bar. They hold it at 45° and a 3-3.5 mm screw locks each one.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 11
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
Two feet for the original Yongnuo YN360 RGB LED bar. The bar sits in the cradle at 45°, so the light faces up. A 3–3.5 mm screw through the upright keeps each foot from sliding along the tube.
Print two in PLA, one for each end of the bar.
You also need two screws, 3–3.5 mm, one per foot.