1 / 7
Incubator legs for a Jumbo box — 20×20 mm - premature babies toys — zdjęcie 1
1 / 7

Incubator legs for a Jumbo box — 20×20 mm - premature babies toys

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Folding 20×20 mm legs for a Jumbo box. PLA brackets, PETG joints, and a 4–6 mm cross bar.

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
12
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

THIS IS A TOY!
My daughter wanted to play doctor in a neonatology ward, so I made this prop.

Folding legs for a cheap transparent Jumbo storage box, used as a homemade enclosure. The frame is 20×20 mm aluminium profile in an X. The box sits on the white corner brackets.

White parts are PLA. Black parts are PETG, used on the joints that carry the load. Screws fix the printed parts to the aluminium.

A threaded bar ties the two leg pairs together. The holes are 6 mm. An M5 bar fits, and so does any rod from 4 mm to 6 mm.

Print the white parts in PLA and the black parts in PETG.

Also needed: 20×20 mm aluminium profile, screws for the brackets and joints, a threaded bar 4–6 mm, and a cheap Jumbo transparent storage box.

This is a homemade frame for that box. A hospital incubator also holds temperature, humidity, and oxygen.

Tagi