Raspberry PI 5 Case - with compability with Raspberry Pi Official fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have made this simple Raspberry pi 5 case that is compatible with the official Raspberry pi fan.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 20
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have designed this simple Raspberry Pi 5 case that is compatible with the official Raspberry Pi fan.
It uses screws to connect the lid to the base of the case.
I have designed this case to have great airflow in mind by using an open design rather than a closed finished design; this improves the printing time too.
On my printer I had approx. 1h20 of printing time by default, but you can tune it for faster printing time.
I have designed a cutout for the io ports so that you can connect cables with ease because I have put a bigger margin.
I would recommend using PETG for the print because the Raspberry Pi 5 gets pretty hot under load.
Thank you !