"Zydrate" Gun Prop based on Repo! The Genetic Opera
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
"Zydrate" Gun Prop Inspired by Repo! The Genetic Opera
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 31
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Share Alike
"Zydrate" Gun Prop
Inspired by Repo! The Genetic Opera
(I do not claim any rights to this IP this is a fan inspired rendition, not an exact copy)
Directed by Darren Lynn Bousman and based on the 2002 stage musical of the same name, written and composed by Darren Smith and Terrance Zdunich. This movie features a fictional drug named Zydrate, that is administered via a gun-like injector. This is a version of that prop that is close to the dimensions and layout of the one in the movie but is NOT a direct copy.
I created this early in my 3D printing experience so a lot of it is simply "kitbashing" 2 models together one after another, and then repairing the mesh until I had something resembling what I wanted. I recently went back through and thanks to good notetaking I was able to identify and verify the licenses for the things I used so that I could post this.
This is not quite a finished prop, the movie used version has a trigger assembly which this does not, and a glowing liquid in the vial that is not supper FDM friendly, However I suspect a lot of folks can use this as a jumping off point to take it that final mile. I also changed some details like the handle for simplicity or aesthetic reasons, or based on what "worked".
Due to my relative inexperience this is a little challenging to print, I included the 3mf file I used to preserve some of the orientations and support settings that worked for me but be aware this has a lot of overhangs and some very thin pieces,
The needle needs a low tension spring (I used 1 from a vacuum sensor for a furnace but I'm sure a quick Amazon search will help, it should be 30mm X 10mm, two 15mmX 10mm instead of one 30mm would also work.
This was mostly achieved via TinkerCAD and OrcaSlicer, though I did use FreeCAD and Meshmixer to force a watertight model after so many mesh modifications.
Edit: I added a cover photo with more post processing, including:
Rub'n'buff pewter to add metalic sheen.
Vinyl black tape on the handle.
Black paint accents.