1 / 11
3 in 1: CoralBoard Enclosure with 10" Rack Adapter and Desk Stand — zdjęcie 1
1 / 11

3 in 1: CoralBoard Enclosure with 10" Rack Adapter and Desk Stand

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

CoralBoard Enclosure with 10" Rack Adapter and Desk Stand

Ocena
0 / 5
Polubienia
5
Pobrania
1
Wydruki
0
Wyświetlenia
71
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A versatile, 3D-printable enclosure designed specifically for the Synaptics CoralBoard. The original official STEP model of the board is preserved without modifications, and all port openings are positioned according to the board's actual connector geometry.

The enclosure supports two mounting configurations:

1. 10-inch Server Rack — 1U

The enclosure fits into a dedicated, one-piece rack adapter designed for a standard 10-inch server rack. The top surface sits flush with the rack panel for a clean, integrated appearance.

The enclosure is secured to the adapter using 8 magnets (4 + 4) and 2 alignment pegs, allowing it to be installed and removed easily without permanently fastening the enclosure to the rack adapter.

2. Vertical Desktop Stand

The enclosure can also be placed vertically on a dedicated desktop stand. No screws or magnets are required for this configuration: simply position the enclosure on the stand by hand.

Hardware Required

  • M3 heat-set threaded inserts

  • M3 × 12 mm screws

  • 8 magnets for the rack adapter (4 per mating side)

  • 2 alignment pegs

Designed for practical everyday use, this project combines a compact enclosure, convenient access to the board's connectors, and two versatile mounting options.