Cherry Blossom Turtle Emoji Keyhanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A model of a Cherry Blossom Turtle from "emoji kitchen". Printed using full spectrum CMYK (white key).
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 4
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made a keychain of the Sakura Turtle emoji from "emoji kitchen". Uses full spectrum color mixing to achieve the various colors.
I changed the model slightly from the picture of the print that is presented: I changed the wall generation to Arachne, moved the keyring a bit more inside the body and made 05_bloemhart_oranje larger: it is now 2.4X2.4X4 from 1X1X4 to match the petals and the rest of the print. This is to fill in the tiny gaps that would appear in the cherry blossom flower. I've yet to fully find the optimal settings for the print. Further tinkering may improve the result even further. Decreasing layer height would also improve the result of the color mixing, especially when looking from the side.
Note: the included filaments in the .3mf have a pretty low bed temperature for PETG (in my experience). This was printed during the summer and thus it was fine, but you might want to adjust these settings for better bed adhesion.
Printed on the Snapmaker U1 with CMYK (key being white in this case). This used opaque PETG filament so I was very pleased with how the results turned out.