Airsoft camera case (Digma DiCam 880)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a custom-designed protective housing for the Digma DiCAM 880 action camera, specifically optimized for airsoft
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 10
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Public Domain
This is a custom-designed protective housing for the Digma DiCAM 880 action camera, specifically optimized for airsoft gameplay. The design combines a lightweight corner bumper frame with a modular protective shield for the lens.
Key Features:
SQB Optimized: Lightweight and low-profile design to avoid snagging on cover, gear, or equipment during fast movement.
Modular Lens Protection: Features a dedicated slot above the lens for a replaceable polycarbonate (PC) shield, secured with a thin layer of double-sided tape. Replace the shield in seconds if it gets scratched or cracked – no tools required. Keep the main frame!
Accessibility: Precise cutouts for the lens, buttons, and USB/HDMI ports.
Mounting: Uses a specialized mounting bracket for a secure and stable attachment to your helmet or gear.
Vented: Small intentional gaps are left for heat dissipation and air circulation, keeping the camera cool during long games.
Recommended Print Settings:
Material: PETG (strongly recommended for impact resistance) or PLA+.
Walls: 3 perimeters (2.5–3 mm thickness).
Infill: 40–50% (Gyroid).
Supports: Tree/Organic supports from build plate only.
Assembly: Requires a small piece of double-sided tape for the lens shield.
Safety Note:
Print and use at your own risk. Always test the impact resistance of your shield material before gameplay. This design is intended for SQB/airsoft use with projectiles up to 1.5 J. The creator is not responsible for any damage to your camera.