No Hardware Dart Zone Repeater Pro Adjustable Stock (STL, STP, f3z)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adjustable stock for the Dart Zone Repeater Pro
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 239
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Demo Video:
Adjustable length is from Dart Zone stock to OOD extended stock, I will also update this to include a longer version if requested by a comment. (+2.5in from Dart Zone stock)
Print Settings:
This model is made for 0.2mm layer height tolerances.
Component orientation: (lay flat like so and enable tree supports)
For STL:
Print one of each unless there is a "#x" in front of it. # represents how many of that piece to print. Example: 5x C Clip = print 5 of C Clip.
For 3mf & STEP:
If importing from STEP file or 3mf layout, everything is already included. As long as you print all the parts in it it will work.
For the 5 big pieces (Stock Butt, Stock Rachet, Rachet) I recommend to print with 4 walls, any infill will do.
Assembly Guide:
I also plan on adding a height adjustable cheek rest to this stock later on, it will be an addon based on this original geometry so if you need to print this stock now it will still be compatible.