DS18B20 Temperature Sensor Holder — 6 mm Probe
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A compact 3D-printable wall mount for DS18B20 temperature sensors with a 6 mm stainless steel probe.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 21
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A compact 3D-printable wall mount for DS18B20 temperature sensors with a 6 mm stainless steel probe. Designed for brooder boxes, incubators, and other DIY temperature-monitoring projects.
The round sleeve supports the sensor while leaving the sensing end exposed inside the enclosure. A continuous slot along the sleeve and mounting flange allows the sensor and cable to be inserted from the side without disconnecting any wiring.
Features:
Designed for a 6 mm diameter temperature probe.
Requires a 3/8″ (9.5 mm) hole through the enclosure wall.
Secures to the wall with two screws.
Open slot for easy installation and removal.
Keeps the sensor neatly positioned through the wall.
Printed and tested in my own brooder box.
Here is the Sensor Link: https://www.amazon.com/dp/B0FLDQJ71M?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1