1 / 8
Snack Bowl for Sprizzer – Clip-on Aperitivo Tray for Aperol Spritz Parties — zdjęcie 1
1 / 8

Snack Bowl for Sprizzer – Clip-on Aperitivo Tray for Aperol Spritz Parties

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Clip-on snack bowl for the Sprizzer spritz dispenser. Hooks over the ice bucket rim. Up to 6 bowls fit around it.

Ocena
0 / 5
Polubienia
2
Pobrania
1
Wydruki
0
Wyświetlenia
12
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Snack Bowl for Sprizzer – Clip-on Aperitivo Tray for Aperol Spritz Parties

Turn your Sprizzer into a full aperitivo station! This clip-on snack bowl hooks directly onto the rim of the ice bucket. Olives, chips, nuts and taralli sit right next to the drinks.

Features

  • Hooks over the ice bucket rim, no tools or glue needed

  • Back wall follows the 10° taper of the ice bucket for a snug fit

  • Up to 6 bowls fit around the ice bucket

  • Designed and test-fitted on a real Sprizzer

Dimensions

  • Height: approx. 60 mm

  • Depth: approx. 75 mm

  • Wall thickness: 2 mm

Printing

  • Material: PETG for the part, PLA as support interface

  • Orientation: upside down, as provided in the file

  • Supports: required. The bowl is printed in PETG, with PLA as the support interface layer. PETG and PLA don’t bond to each other, so the supports release cleanly and leave a smooth surface on the inner contact area. With single-material supports, this surface turns out rough.

  • Multi-material: This is a two-material print and needs an AMS or similar multi-material system.

  • 3MF: The included 3MF is fully set up for the Bambu Lab P1S with AMS.

  • No AMS? Print with PETG supports only. It works, but expect a rougher surface inside.

Notes

  • Food safety: Standard PETG and PLA prints are not certified food-safe. Use the bowls for dry snacks only or line them with a small paper liner. Hand wash only.

  • Not affiliated: This is a fan-made accessory and not affiliated with Sprizzer srl or Campari. Brand names are used only to describe compatibility and use.

  • AI images: The images marked “AI-generated visualization” show how the bowls look on the dispenser. All other photos show the real print.

Visit my Etsy-Shop to buy 3D-printed models:
https://schichtarbeit3d.etsy.com

Tagi