1 / 3
Universal Hair Dryer Wall Holder – Funnel Cradle + Cord Pocket, No Supports — zdjęcie 1
1 / 3

Universal Hair Dryer Wall Holder – Funnel Cradle + Cord Pocket, No Supports

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Self-centring 45° funnel fits most hair dryers; side pocket for the cord, hidden screws, S/L sizes.

Ocena
0 / 5
Polubienia
1
Pobrania
2
Wydruki
0
Wyświetlenia
12
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bathroom
Licencja
Standard Digital File License

One holder for (almost) any hair dryer. Instead of a fixed ring it has a 45° funnel: the nozzle drops through the bottom opening and the dryer body settles on the cone exactly where its diameter fits – it centres itself and does not rattle. Next to it there is a small pocket for the coiled cord, the concentrator nozzle or a brush.

  • Funnel cradle, self-centring: S – opening Ø54 at the bottom, Ø94 at the top (nozzles up to ~Ø50, bodies ~Ø56–93 mm); L – Ø66 → Ø110 for big salon dryers (nozzles up to ~Ø62, bodies ~Ø68–109 mm).

  • Cord / nozzle pocket: 34 × 34 × 22 mm inside, open at the top.

  • Hidden screws: 2 × Ø5 holes with 90° countersinks in the wall plate above the funnel – once the dryer hangs, its body covers the screw heads. Screws 4–4.5 mm + wall plugs.

  • Prints without supports: standing in the use position, funnel and pocket on the bed. The outside of the funnel is a 45° overhang, everything else is vertical. 3MF ready to print.

  • Size: S 104 × 133 × 48 mm, L 120 × 146 × 48 mm.

Print settings

  • Orientation: as in the 3MF / STL (funnel and pocket on the bed, wall plate upright).

  • 0.20 mm layer, PLA or PETG (PETG if the bathroom gets hot and steamy).

  • Bambu Lab A1, PLA, 0.20 mm (2 walls, 15% infill): S – 1 h 18 min / 37.8 g, L – 1 h 27 min / 43.8 g.

Tip: measure your dryer – the nozzle must pass the bottom opening, the body has to be wider than the bottom opening and at most as wide as the top one. Screw the holder to the wall before you hang the dryer.

Designed from scratch by bezbajzlu.

Tagi