Dinosaur Cookie Cutters & Stamps - 17 Designs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A prehistoric cookie collection: 17 designs, each with a matching cutter and detail stamp together in one STL file.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 13
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Make your own prehistoric cookie collection! This set includes 17 playful designs, each with a separate outline cutter and a matching detail stamp. Use the cutter on its own for a simple silhouette, or add eyes, smiles, scales and other details with the stamp.
The collection brings together dinosaurs, other prehistoric animals and a dinosaur footprint. Choose a favourite or mix several designs for a dinosaur-themed batch.
**17 designs included:**
- Ankylosaurus
- Brontosaurus
- Carnotaurus
- Compsognathus
- Dilophosaurus
- Dimetrodon
- Dinosaur Footprint
- Mosasaurus
- Pachycephalosaurus
- Parasaurolophus
- Plesiosaurus
- Pterodactyl
- Spinosaurus
- Stegosaurus
- Triceratops
- Tyrannosaurus
- Velociraptor
**Files included:**
- 17 STL files, one per design, each containing a cutter and its matching stamp.
- The two parts are arranged next to each other with a 6 mm gap and no connecting base.
- Example: triceratops-cutter-and-stamp.stl contains both Triceratops parts.
- A design overview and a table of the exported dimensions.
**Design details:**
- Cutter height: 15 mm.
- Cutter wall: 1.2 mm, with a 0.6 mm cutting edge.
- Wider grip rim: 3.5 mm outward from the silhouette, 3 mm high.
- Stamp: 3 mm backing plate with 2 mm raised details, 5 mm total height.
- The stamp backing is inset by 0.9 mm from the matching silhouette.
Each paired layout fits on a 220 x 220 mm build plate at original scale; allow extra room for any brim or skirt.
**Printing and use:**
Print the cutters with the wide grip rim on the build plate and the cutting edge facing up. Print the stamps with the flat backing on the build plate and the raised details facing up. No assembly is required. The geometry is designed to print without supports in these orientations; check the thin cutting edge and stamp details in your slicer's layer preview.
For use, turn the cutter and matching stamp over in the same direction so the silhouettes align. Cut the outline, then gently press the matching stamp into it. The stamps have no depth stop, so control the impression depth by hand.