1 / 4
Opening idler door for the Prusa Mk3s & MMU2s — zdjęcie 1
1 / 4

Opening idler door for the Prusa Mk3s & MMU2s

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Tested now. Seems to work well. :D At some stage I'll tweak it a bit more to thicken up some of the walls.

Ocena
4,5 / 5
Polubienia
26
Pobrania
209
Wydruki
2
Wyświetlenia
4778
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Tested now. Seems to work well. :D At some stage I'll tweak it a bit more to thicken up some of the walls.

The MMU idler door for the MMU2s is a nuisance to open, as the lever used to activate the sensor interacts with the extruder body. This mod uses a 8mm M3 screw and bolt to disengage the lever from the idler door.

To open the door, just unscrew the main idler tensioning bolt. Then just unscrew the lever screw while opening the door.

Tagi