Raspberry Pi Ensclosure and Headphone stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A raspberry pi enclosure that is also a headphone stand...
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 3
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Raspberry Pi Ensclosure and Headphone stand
So, as the name suggests, this is an enclosure for raspberry pi's 4 and 5 that is also a headphone stand (idk how i got the idea😭)
Anyways, so here are the little specs it has ->
Magnetic top cover
Friction fit bottom cover
Easy access to the pi itself
A headphone stand that stands around 30cm above the ground
Vent holes for cooling
Rubber Feet for added grip and support
A removable top cover also can be used as just a headphone stand too!!
Assembly Instructions ->
(there is very little assembly required)
First print all the parts
Then take 8 1.5 x 4mm neodymium disc and ring magnets and glue them to their respective depressions on the top of the side case and the bottom of the top cover as shown in the images below ->
Now just slide the raspberry pi into the side case while making sure that the ports align with their respective places in the case.
Next just slide the bottom case onto the bottom of the side case, carefully aligning the friction fit pegs and their respective depressions.
DONE THE HEADPHONE HOLDING, RASPBERRY PI ENCLOSURE IS FINISHED!!!
About me ->
So.... i am a 16 yr old teenager and i love 3d modelling, designing custom electronics, PCB's, and making the occasional non vibe coded website!!!
would appreciate it if u could pls give this printables page a nice rating, and also feel free to remix this project!!!
some of my other projects --->
[Trainer RC Plane] (https://github.com/DhairyaAPImaster/Trainer-RC-Plane)
[Custom USB Hub](https://github.com/DhairyaAPImaster/Cool-Stuff-USB-HUB)
[Custom Retro Handheld Gaming Device](https://github.com/DhairyaAPImaster/TGH-The-great-DIY-Handheld]
[Custom 60% Keyboard](https://github.com/DhairyaAPImaster/60-Agni)
[Freestyle Custom Libre Continuous glucose monitor reader](https://github.com/DhairyaAPImaster/Carbsion-Custom-freestyle-libre-Reader)
[Runway Hackathon Landing Page](https://github.com/DhairyaAPImaster/Runway-Hackathon-Landing-Page)