Uberti Firearms sign magnet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Uberti Firearms sign, magnet, or plaque
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 3
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a 3D version of the Uberti Firearms logo. Uberti is an Italian company that makes nice reproductions of many old west United States guns like the Colt's and Remington's used in the U.S. civil war and afterwards. Their guns are popular with cap and ball / black powder shooters.
This print is about 120mm x 80mm x5 mm. The 3mf has negative volumes (pockets on the back) for 5 magnets you can add if you want. I used 6x2 round magnets like these .
The 3mf has the colors in it for an MMU or INDX. It should be usable in other slicers with some tweaking. I used PLA in yellow, medium/sky blue, black, and white.
There is also a STL file if you want to mix it yourself. You will need to add the magnet holes if you use that one.
This was made using a picture converted with Inkscape to a SVG then converted to a STL. It is a little rough but I think it came out okay. I did have trouble with the E in Uberti for some reason. In the 3mf the hole is just painted on (lol). Or paint it on after you print it.
I have a Pietta sign here if you want one for them https://www.printables.com/model/1896397-pietta-firearms-sign-magnet