Dishwasher Rack Wire Size Gauge 3.0-4.4 mm - Find the Right Clip Before Printing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Snap-on test comb with eight openings, 3.0–4.4 mm, to find your dishwasher rack wire size before printing a clip.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 4
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A snap-on test comb for finding your dishwasher rack's coated wire size before you print a clip, cap or hook for it. Eight openings from 3.0 to 4.4 mm in 0.2 mm steps, each size engraved beside it. Push each one onto the rack wire: the smallest opening that snaps on and stays put is your size.
The range covers rack wire of roughly 2.5–3.5 mm bare steel with 0.3–0.4 mm nylon coating, as one rack maker publishes it. Your rack may fall outside that; if no opening fits, tell us in the comments.
Print settings: PETG or PLA, flat, no supports, 0.2 mm layers. Size 92 × 12 × 6 mm.
Before you print: this is a measuring aid, not a rack part. Not for parts carrying load, pressure, heat or electricity.
Licence: CC BY-NC-ND 4.0, personal non-commercial use.