Speed Graphic 38.65mm Lens Hood for 135 & 127mm Kodak Ektar
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/4hriEmwUDbP The Base was produced…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 218
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/4hriEmwUDbP
The Base was produced in Fusion 360. I am just learning how to use it.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.20
Infill:
.30
Filament: eSun PETG Black
Notes:
The Speed Graphic (1947) I own has the 135mm Lens. I also have the 127mm Kodak Ektar. This Push-On hood fits both nicely. At 55 speed this prints in about 90 minutes.
I ran about 240C and 70 for the bed, I also used a Brim to stabilize it. At some point I will design in some filter threads. The top of the Hood is 67mm.
Dimensions if you mess with this yourself..
The inner Base is ID is 38.65mm and 5mm tall to cover the lens.
The O.D. of the Base is 42.20mm
The height of the lens is 30mm. The Cone is 2.2mm thick.
If you do decide to use gaffers tape..it is about 0.28mm thick.
Enjoy :)
Category: 3D Printing