1 / 1
Wet Brush Paddle Hairbrush Replacement – Reinforced & Vented — zdjęcie 1

Wet Brush Paddle Hairbrush Replacement – Reinforced & Vented

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement Wet Brush paddle frame with drainage holes and an experimental Y-rib. Reuses the original bristle pad.

Ocena
0 / 5
Polubienia
1
Pobrania
1
Wydruki
0
Wyświetlenia
19
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Wet Brush Paddle Hairbrush Replacement

The plastic frame on our Wet Brush broke, but the rubber bristle pad was still perfectly fine. Rather than throwing away the whole brush, I measured the original and designed a 3D-printable replacement frame to reuse the existing pad.

I kept the drainage holes so water can escape from behind the rubber pad, allowing the brush to dry rather than trapping moisture that could lead to mold or buildup.

The original brush cracked across a row of drainage holes, so I rearranged the holes and added a 1 mm raised Y-shaped reinforcement to the backing in an attempt to improve strength around the area where it broke. Whether this actually improves long-term durability remains to be seen.

The replacement also has a rounded handle for comfort and a retaining channel designed to hold the original rubber bristle pad.

Suggested Print Settings

  • Material: PLA

  • Nozzle: 0.4 mm

  • Layer height: 0.20 mm

  • Walls: 6

  • Infill: 30–35% Gyroid

  • Top/bottom layers: 9

  • Orientation: Flat back against the build plate

  • Brim: 4 mm if needed

  • Supports: None required

Dimensions

  • Overall length: 245 mm

  • Maximum head width: 82.5 mm

  • Head thickness: 8.5 mm

  • Perforated backing: 3.6 mm

  • Cushion recess: 4.9 mm

  • Visible opening width: 70.25 mm

  • Under-lip width: 75.75 mm

  • Drainage holes: 57 × 2.8 mm

Compatibility

This was designed around one particular vented Wet Brush paddle model. Other models or versions may have different dimensions, so check yours before printing.

I've successfully printed the replacement and installed the original rubber bristle pad. The fit works, but long-term durability hasn't been tested yet. I'll update the listing as we use it.

The retaining channel is designed around the original flexible pad, so take care when installing it and avoid forcing it into place.

Personalization

Adding a child's name embossed on the handle is a fun little touch, especially if you're printing one to replace a kid's brush.

Feedback

If you print one, feel free to share a Make or leave a comment about how it fits and holds up over time. I'd be interested to know how it works for others.

Unofficial replacement part. Not affiliated with or endorsed by Wet Brush.

Tagi