1 / 4
Gluon Toolhead - Slimstruder — zdjęcie 1
1 / 4

Gluon Toolhead - Slimstruder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A toolhead system built around the Slimstruder, focusing on weight/size, ease of maintenance and ease of assembly.

Ocena
0 / 5
Polubienia
12
Pobrania
8
Wydruki
0
Wyświetlenia
406
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Open Community License v1.1 + GAtt v1 + Micro v1

WARNING!

THIS PROJECT IS IN OPEN BETA AND THIS REPOSITORY IS INCOMPLETE - SEND YOUR SUGGESTIONS FOR HARDWARE (e.g. hotends, fan types, leveling probes) TO THIS E-MAIL: [email protected]

OR JOIN THE POSITRON 3D DISCORD TO ASK FOR SUPPORT AND DISCUSS: https://discord.gg/wxumWvjmCV

The files are undergoing changes and redesigns regularly, please make sure you have the latest files when building/printing.

BOM:

The BOM is a work in progress, however it is now available to cross-reference hardware available to you and the hardware needed to build the Gluon Toolhead or the Slimstruder. 

BOM: https://docs.google.com/spreadsheets/d/12q0-0sZ9T2bFXKFYikON-Bi6Q4nC3gVPp5naMjx8Y_M/edit?gid=0#gid=0

A configurator is an idea I wish to pursue at some point, however that is likely far away.

Build Guide:

The build guide is not yet available, please use the assemblies for reference. (Currently outdated, will be updated ASAP.)

Why does this exist?

This is a toolhead system designed around the Slimstruder. The Slimstruder was designed to be as slim, light and as easy to maintain as possible. The Slimstruder was first conceptualized to be put on a Positron, however that project is currently on the backburner. The slimness required for the Positron has the benefit of positioning the center of mass really close to the X-Gantry, reducing twisting moments on the carriage and reducing weight in general.

Why make an entire toolhead out of it? It's fun, and a challenge. Plus, I need more data, and meanwhile some more niche projects may profit form Gluon's existence.

The Gluon Toolhead - Slimstruder isn't my first attempt at designing a toolhead. The first toolhead I ever attempted was an Ender 3 upgrade. It didn't go well. The second attempt came when I was building a custom printer. I still use the printer and it's great, but some days I just want to smack my old self over the head with a comically large spoon. Specifically when I have to do any sort of maintenance. At the time I was obsessed with sharp edges, big fans, and hiding wires. I didn't manage to hide them all, but the ones I did hide are a semi-regular pain in my backside.

So I did a 180 with the Gluon Toolhead. No more hidden wires, no more oversized fans and no more M3x45mm screws you have to undo to remove the cowling. You can detach the entire toolhead from the adapter plate by undoing 2 screws. What about detaching the cowling from the Slimstruder? 2 screws. Part cooling fan burnt out? 4 screws. Need to remove the Motor? 4 screws. Hotend giving you trouble? 6 screws. Maintenance is supposed to be easy. And it's easiest when the toolhead is on the table in front of you, and the maximum amount of screws you need to undo to remove a part is 8. (It's the ducts if anyone is curious.) And it's also much easier when the machine has a backup toolhead you can swap out in minutes to minimize downtime.

If you really hate visible wires, this toolhead is not for you. If you want insane speeds and 100mm^3/s of flow, this toolhead is not for you. If you want to have near limitless combinations of hotends, fans and probes, this toolhead is not for you. It's for people who are excited about the same things as me: Low mass and ease of maintenance.

Since this project is still in its infancy, there is currently no build guide (However a full assembly of the Dragon and Rapido variants with all fasteners and inserts are available) and only a limited amount of supported hardware, a list of which you can find further down below. You are welcome to send in your suggestions, however I may not be able to support all of them. The ones that are work in progress will be added ASAP.

There are currently no supported probes, the 2 mounting points in the front are designated probe attachment points. The BIQU Microprobe and Beacon will be supported 100%.

I am currently working on finding a way to supply the main ring gear, as it is a fully custom part. It is currently self-source. It should be manufactured either with wire EDM or laser cut. The material should be at minimum stainless steel. The specifics will be in the build guide, however JLC CNC, though expensive, provided me with a wonderful part, #notsponsored. The planet gears are printable on an FDM printer, however a layer height of 0.1mm and a nozzle of 0.25mm or smaller are required to get any sort of precision. More on print settings in the specs and settings section.

Currently supported hardware:

Hotends:

  • Phaetus Dragon ST/HF

  • Dragon Voron

  • Phaetus Rapido HF/UHF

  • Revo Voron

  • Revo Voron - Crooked Crow

Part cooling fan configurations:

  • 2x4010

  • 1x4010

WIP hardware support:

Hotends:

  • VEZ3D Goliath

  • CHC XL

  • BambuLab P1/X1C Hotend

Leveling Probes:

  • BIQU Microprobe

  • Beacon

Hardware that will NOT be supported:

  • Groove mount hotends

  • CR mount hotends

Specs and Settings:

Config and Performance:

  • Rotation distance: 19.27

  • Slimstruder pulling force (perfect efficiency): ~32.61N or ~3.33kgf

The pulling force is similar to the Bondtech Mini as seen here: https://github.com/Annex-Engineering/Annex-Engineering.github.io/blob/master/extruder_force.md

Slimstruder tips and print settings:

Do not use PLA under any circumstances. On open frame printers PETG should do just fine, for enclosed printers ASA/ABS is a must.

Lithium grease is recommended to lubricate the gears, just put a pea sized dollop on the teeth. For added longevity it is also recommended to put a very thin layer of lithium grease on the flat sides of the ring gear.

Use the recommended settings for maximum performance.

Part Name

Recommended Settings

Main Plate

Nozzle: 0.25mm

Layer height: 0.1mm

Perimeters: 8

Top/Bottom Shell Layers:  10

Infill: 50%, Cubic

Bearing Carriage

Nozzle: 0.25mm

Layer height: 0.1mm

Perimeters: 8

Top/Bottom Shell Layers:  10

Infill: 50%, Cubic

Tensioner Plate

Nozzle: 0.25mm

Layer height: 0.1mm

Perimeters: 8

Top/Bottom Shell Layers:  10

Infill: 50%, Cubic

Motor Spacer

Nozzle: 0.25mm

Layer height: 0.1mm

Perimeters: 8

Top/Bottom Shell Layers:  6

Infill: 50%, Cubic

Planet Gears

Nozzle: 0.15mm

Layer height: 0.05mm

Perimeters: 5

Top/Bottom Shell Layers:  6

Infill: 50%, Cubic

OR

SLA printed, solid

If you like what I do and want to support further development of this project, please consider supporting me here: buymeacoffee.com/3d_design_fun

Tagi