Mini Battleship
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The all time favorite game, Battleship! (Although in a relatively small form factor)
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 15
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution
3D Printed Battleship
General info
Soo this is battleship, the classic game, but 3D printed
The holes on the boards are spaced 10mm (1cm) apart (center to center), so if you'd like to model your own pieces / source them from somewhere keep that in mind.
This needs 38 4x1mm neodymium magnets if you'd like to make parts snap together
Rules:
Find the rules of Battleship here: https://www.hasbro.com/common/instruct/battleship.pdf
This version only has 3 unique pieces, and you can print the same pieces as many or as few times as you want to increase or decrease the difficulty.
Print and Assembly:
Print 4x Battleship Boards. 2 for each player.
One for your pieces, and one to keep track of where your opponent has struck.
Attach 7 neodymium magnets to each indented circle.
Store pieces and pins in the compartments given and snap it closed with a lid!
Print the entire set of pins twice, one set for each plater. Extra pins have also been supplied cuz these are TINYYYY
Pieces (3 given)
Print as many as you want, with the base starting at 3 pieces per player
Slot the pieces into the holes on the battleship board to position them
If your opponent has hit your pieces, red pins can be inserted into the ships to mark them.
Dividers
These ensure that nobody peeks 👀
Print 2, attach 3-4 neodymium magnets on each in such a way that they attach to boards on both sides.
The magnet on the side of the dividers allow it to slot with other dividers
If you REALLY don't trust your team mate, you can print 2 more and attach it to the sides of your board instead of team markers.
Team Identifiers:
These are to be printed as a set of 4 and 3 neodymium magnets is to be attached to the indented hole of each.
Each player gets 2 identifiers to magnetically attach to both boards to keep track of which is yours and which is your opponents
Final Setup:
Final setup should look something like this:
Happy Printing and thanks for looking into this! 💖