1 / 3
Thermomix TM 5 C148 / C142 Reparatur Clip — zdjęcie 1
1 / 3

Thermomix TM 5 C148 / C142 Reparatur Clip

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Reparatur Clip 3 tlg. für den Verschluss des Gehäuses nach der Reparatur des Verschließ Mechanismus ohne kleben!!

Ocena
0 / 5
Polubienia
2
Pobrania
4
Wydruki
0
Wyświetlenia
28
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Wenn man den Fehler C148/C142 beim TM5 & TM6 beheben möchte muss man dafür oft die Verschließ Mechanik öffnen und das kleine Kunststoffzahnrad ersetzen.

Wenn das Gehäuse dieses Mechanismus erst einmal geöffnet ist bzw. aufgebrochen wurde, kann man dieses Gehäuse eigentlich nur noch kleben.

Um für eine erneute Reparatur oder Schmierung des Antriebes einfacher zu gestalten, habe ich diesen Clip gedruckt, welcher den Verschluss seitlich über den Gehäuserand erreicht. 

Am besten 2 x kurz und 1 x langen Clip drucken und an 3 Seiten aufstecken, zusätzlich kann man, muss es aber nicht, noch 2 Kabelbinder um das Gehäuse ziehen.   


If you want to repair the C148/C142 error on a TM5 or TM6, it is often necessary to open the locking mechanism and replace the small plastic gear.

Once the housing of this mechanism has been opened or broken apart, it can usually only be reassembled using glue.

To make future repairs or lubrication of the drive mechanism easier, I designed and printed this clip. It locks onto the housing from the side and securely bridges the housing seam.

For best results, print 2 short clips and 1 long clips and attach them to three sides of the housing. Additionally, you can, but do not have to, secure the housing with two cable ties around it.

Tagi