Pimax Dream Air (SE) SLAM Front Plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The official front plate for the Dream Air with SLAM tracking. Print a replacement, try a new colour, or use it as a bas
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 83
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Virtual Reality
- Licencja
- Creative Commons — Attribution — Noncommercial
This is the front plate of the Pimax Dream Air in its SLAM version, exported directly from our production CAD file.
The four openings, two at the top corners and two at the lower outer edges, line up with the headset's tracking cameras. Keep these clear in any design you make, or inside-out tracking will not work.
What you can do with it:
• Print a replacement plate
• Change the colour or finish to make the headset your own
• Use the STEP file as a starting point for your own mounts, covers or accessories
Dimensions: approx. 155.5 x 58.5 x 33.4 mm
File format: STEP
The plate is curved, so print it face up with supports underneath. Print at a fine layer height for a smooth outer surface.
Looking for the version for base station tracking? See our Lighthouse front plate.
Share a photo of your print, we'd like to see what you make.