Arduino Uno Snapcase with Cutouts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
SnapCase for Arduino UNO Dimensions Designed to accomodate an Arduino UNO board. Design Process The goal was to create…
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 78
- Wydruki
- 0
- Wyświetlenia
- 327
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
*SnapCase for Arduino UNO*
Dimensions
Designed to accomodate an Arduino UNO board.
Design Process
The goal was to create a neat and quality case for the UNO board that protects it while still allowing access to all major I/O points.
Help me out
Using the affiliate Link gives me a small kickback and doesn't cost you anything, so if you need filament anyways, using the link below would be very kind!
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
15%
Filament: Goedis PLA Black/Yellow Post-Printing =============
Drilling and tapping
After Printing, drill and tap the holes for your desired mounting screws.
Category: Electronics