1 / 7
BOBBLEHEAD Polar Filament Logo - Low Poly Polar Bear V3 — zdjęcie 1
1 / 7

BOBBLEHEAD Polar Filament Logo - Low Poly Polar Bear V3

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Chopped off the head, to make a bobblehead

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
10
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Test Models
Licencja
Creative Commons — Attribution — Noncommercial

Deriving inspiration from 3DPrinty, I wanted to make the Polar mascot into a bobblehead.

Two body types, horizontal - the head moves up & down, vertical - the head moves left & right.

The head should be printed with support, the spring I'd recommend using PETG.

Assembly is straight forward, glue spring into body, support spring with a flat blade, glue head onto spring.

I used Layerling for the modeling.

Tagi