Minimalist Adhesive Wall Shelf, Miniature Display
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Flat, light tape mounted wall shelf for miniatures. No screws, no holes, no supports. Four sizes.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 11
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A flat, light wall shelf for miniatures that mounts with double sided tape. No screws, no holes, no supports.
WHY IT WORKS
One flat tape band on the back, 25 mm tall, matching standard tape width. No full back plate, no truss, no lattice.
3 mm platform with a 1.5 mm safety lip, a corner chamfer and two end gussets against sag.
Prints flat with no supports, from 1h 17m to 1h 42m depending on size.
Made for tabletop and wargaming miniatures, but fine for any light display piece.
SIZES (width x depth x height, each one is a separate 3mf file)
S: 100 x 80 x 25 mm, 2 per plate, 1h 17m, 53 g (miniature-wall-shelf-w100-d80-x2.3mf)
M: 140 x 85 x 25 mm, 2 per plate, 1h 42m, 76 g (miniature-wall-shelf-w140-d85-x2.3mf)
L: 170 x 140 x 25 mm, 1 per plate, 1h 26m, 67 g (miniature-wall-shelf.3mf)
XL: 135 x 155 x 25 mm, 1 per plate, 1h 19m, 59 g (miniature-wall-shelf-w135-d155.3mf)
Need another size? Say it in the comments.
PRINT NOTES
Printer/profile: Bambu Lab A1 mini, 0.4 nozzle, 0.20 mm Standard, PLA, 10% infill, 2 walls
Supports: no. Brim: no.
Print it flat as modelled, platform on the bed and the band standing up. Do not print it on its back: the layers would split at the corner.
Printed single color; AMS not required
Time and grams are the Bambu Studio estimates for each file.
MOUNTING
Wipe the wall and the flat back face with isopropyl alcohol and let both dry.
Use strong double sided tape (VHB type) across the full band, press hard for 30 seconds, wait one hour before loading.
Keep the load light. Tape does not hold on flaking or crumbling paint.
ABOUT THIS MODEL
Designed by me with AI assistance as a parametric CAD script with exact dimensions (not an AI generated mesh). The photos show one printed shelf in black PLA. The other sizes come from the same design and are sliced, but I did not print every size.