Reusable Zip Tie V2 (Print-in-Place PLA)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 3D-printable, reusable zip tie in PLA. V2 is stronger than the original.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 10
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
Reusable Zip Tie V2 – 5 Sizes
A 3D-printable zip tie you can open, close and reuse again and again. No more cutting cable ties and throwing them away!
This is the improved V2 of my original Reusable PLA Zip Tie, now in 5 sizes.
What's new in V2
- 5 sizes to fit everything from thin cables to thick bundles
- [Improved locking mechanism / stronger hold]
- [Easier to release]
Features
- Fully reusable – release and re-tighten as many times as you like
- Printed in PLA, no supports needed [check]
- Prints flat on the bed, fast and cheap
- Great for cable management, workshop organizing, garden, plants, bags and more
Print settings
- Material: PLA
- Layer height: [0.2 mm]
- Nozzle: [0.4 mm]
- Infill: [100 %]
- Supports: No
- Orientation: Flat on the bed [check]
- Printed on: Bambu Lab A1 mini
Tips
- Don't over-tighten, PLA can crack if forced
- Pick the size that gives a little slack around your bundle
If you print it, I'd love to see an make! Questions and suggestions are welcome in the comments.