3D Sets Doppler - FLAMES!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A set of modifiers to add some cool multi-material hot-rod flames to Doppler's fenders and doors
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 46
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
A new 3D Sets car is here!
And although it is undeniably fabulous by itself, I couldn't resist the urge to individialise.
So I decided to do a Hot-Rod (or for this type of car a "Lead-Sled") variant with some nice multi-material flames decals.
And you can do it too! (if you have access to 2-3 slot multi-material printer...)
The use is a little more difficult this time, because I obviously can't upload original purchased geometry.
But I can't upload my own modifier bodies, that have the same origin-relative position!
I set the flames do only the front fenders and door need multi-material print. Print the rest of the front and the roof in the "front" color, rest od the car in the "rear" one. Or not. Get creative!
1: Open the prepared print plate file for doors/fenders
2: Right click the part you wish to apply the flames to.
3: Select „add modifier“-“load“
4: Navigate to where you saved my files, select them all and confirm
5: Select the desired tools/colors for each modifier.
6: Repeat for the other parts, slice, print and enjoy!
I also added some AI-powered examples of different color options, the modifiers are however 100% hand-drafted via some splines! I'll replace the main photo when I have the full car built!