XY-WTH1 Temperature & Humidity Controller Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple, compact enclosure designed specifically for the XY-WTH1 digital temperature and humidity controller
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 15
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
XY-WTH1 Temperature & Humidity Controller Enclosure
A simple, compact and practical 3D printable enclosure designed specifically for the XY-WTH1 digital temperature and humidity controller.
The entire controller slides into the enclosure, providing a clean and tidy installation. A rear opening allows easy routing of the power supply, sensor and relay wiring.
Features
Designed for the XY-WTH1 temperature and humidity controller
Slide-in design for the complete controller module
Rear opening for convenient cable routing
Compact, one-piece construction
Rounded edges for a clean appearance
No additional assembly required for the enclosure itself
Ideal for DIY electronics, temperature and humidity monitoring or automation projects
Dimensions
Width: 80.5 mm
Depth: 44.5 mm
Height: 60 mm
Recommended Print Settings
Material: PLA or PETG
Layer height: 0.2 mm
Nozzle diameter: 0.4 mm
Perimeters: 3
Infill: 15–20%
Print orientation: Open side facing up
Installation
Print the enclosure.
Route the necessary cables through the rear opening.
Connect the power supply, sensor and relay wiring.
Slide the XY-WTH1 controller into the enclosure.
Note: Verify that all wiring is properly insulated and that the controller fits your particular XY-WTH1 version before installation.
If you like the model, please leave a like or share your make!
Happy printing!