ALL PI – Synaptics CoralBoard Custom Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This custom 3D-printable enclosure combines a clean, professional design with a playful raspberry-inspired appearance.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 26
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Give your Synaptics CoralBoard a unique home with the ALL PI enclosure!
Featuring raised ALL PI lettering, a raspberry logo, and two custom buttons, the case is designed to look great while providing a practical housing for your CoralBoard project.
Features
Designed for the Synaptics CoralBoard
Custom ALL PI lettering and raspberry logo
Two separate printable button components
Removable lid and base
Customizable colors for the case, logos, and buttons
Designed for electronics projects, prototyping, and custom builds
Recommended Print Settings
Material: PLA or PETG
Layer height: 0.20 mm
Walls: 3–4
Infill: 15–25%
Supports: As needed based on orientation
the hardware list is:
4× M2.5 × 6 mm screws — mounting the CoralBoard to the base.
4× M3 screws — securing the lid, if using the screw-fastened version.
Assembly
Print the enclosure base, lid, and two buttons. Install the CoralBoard using compatible mounting hardware, fit the buttons, and secure the lid.