Kenwood Chef A701a Feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Yet another kenwood mixer feet, this fits A701a (1980's), I printed it in TPU, the finer spike will possibly fail but…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 237
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
Yet another kenwood mixer feet, this fits A701a (1980's), I printed it in TPU, the finer spike will possibly fail but it turned out they're not required at all.
The original design had rubber feet that where held in place with expansion (having a nail hammered into them) they tend to turn to dust over 30-40 years and but are actually very important to allow airflow into the motor, flat on a surface without feet the motor will overheat.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.16
Infill:
100%
Filament: Generic PTU TPU NA
Notes:
The finest part of this print isn't really required, once in these hold themselves firmly in place anyway.
Category: Kitchen & Dining