1 / 3
Amcrest Dual Lens Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Amcrest Dual Lens Mount
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 3
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Amcrest Dual Lens Mount designed to offset garage molding. The wing section slides under molding for added weight support as it's mounted with double sided tape. Holes for the screws are pilot so predrill if you need to. Channel for the cable if you need it, I ended up not using it as I needed the tape to cure. If you dont need the wing section, simply cut it off either in the slicer or physically.
