Blinds Pull Down Hook
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For all your pulling needs
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 10
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Noncommercial
by @CriptasticHacker
https://cripsrise.neocities.org/
Please leave a ♥ if this helps you :)
Simple (but effective!) Blinds Pull down hook set
Requires:
M3 countersunk wood screws (5x ideally)
String
Should be self-explanatory from the pics, but you can leave me questions if not :)
The hook has 3 rings - one for your finger (L and R handed models for "Blinds Pully B"), one for the hook, and one for the string
Print D is the hook - 2 versions, one is stronger but untested. I printed this one in white to match my floorboard
"Blinds Pully C" is an extra back piece, in case your screws are too long and you want to cover the pointy bits / secure it even better.
Everything printed using:
Creality K1C (rooted - open source baby! with Fluidd and KAMP)
Overture brand PLA (cheap)
80% infill (3 walls except hook is 4 walls)
Supports - Yes (for part D) - tree supports work well, 0.25mm Z height