All Pi V2 – Synaptics CoralBoard Enclosure with Adjustable Camera Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The All Pi V2 is a custom-designed, fully 3D-printable enclosure built for the Synaptics CoralBoard.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 62
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Designed with both functionality and appearance in mind, this enclosure provides a clean, professional housing with an integrated adjustable camera mounting system. as well as two holes for mounting the base to wall or desk
Unlike basic electronics enclosures, the All Pi V2 features a multi-piece camera assembly with a ball-joint design, allowing the camera to be positioned and adjusted to suit different applications.
This enclosure features a custom adjustable mount for the Arducam OV5647 5MP 1080p Mini Camera Module. It includes a ball joint and rotating arm for angle adjustment, plus a protective two-piece housing.
Custom CoralBoard Housing: Designed around the Synaptics CoralBoard with dedicated mounting locations.
Adjustable Camera Mount: Ball-joint assembly allows the camera to be repositioned.
Protective Camera Cover: Separate printed cover for a cleaner, more finished appearance.
Modular Construction: Multiple printed components assemble using screws for easier maintenance and replacement.
Removable Lid: Four corner screws secure the main enclosure.
Fully 3D Printable: Designed for FDM printing using standard filament.
Hardware Requirements
Recommended self-tapping screws for plastic:
M2.5 × 10 mm – Main enclosure lid
M3 × 10 mm – Main base and camera base
M2.5 × 8 mm – Internal mounting posts
M3 × 12 mm – Ball mount
ball1 to ball 2- m2 x6
M3 × 8 mm – Ball retainer
M3 × 6 mm – Camera cover
Chip mounting: 4 × M2.5 × 6 mm self-tapping screws
Hardware lengths are estimated and should be verified during assembly.
Electronics
Synaptics CoralBoard
Compatible camera module and connection cable (sold separately)
Recommended Printing Settings
Material: PLA+ or PETG
Layer Height: 0.2 mm
Wall Loops: 3–4
Infill: 20–30%
Supports: As needed for camera mounting components
Print Orientation: Position individual components for maximum strength and minimal supports
Assembly Notes
Print all components and carefully remove any supports. Install the CoralBoard into the main enclosure, secure the lid, and assemble the adjustable camera mount using the appropriate screws.
Check camera clearance and ball-joint movement before final tightening.