1 / 4
Flexi Dragon Keychain 龙 | Chinese Zodiac | Print in Place — zdjęcie 1
1 / 4

Flexi Dragon Keychain 龙 | Chinese Zodiac | Print in Place

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A wiggly print-in-place dragon keychain, first of our 12 Chinese zodiac flexis.

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
3
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Standard Digital File License

Meet the Dragon (龙), the first of our twelve Chinese zodiac flexi keychains.

It prints in one go: no supports, no assembly, no glue. It comes off the bed in seven parts with six joints, wiggles like a proper dragon, carries the character 龙 on its back, and its pearl doubles as the key-ring loop.

Size: 131 x 33 x 6 mm.

Test-printed on our Creality SPARKX i7: that's the print in every photo and video. A ready-made Creality Print project for the i7 is included next to the STL, plus an Anycubic Kobra X project set up the same way (not test-printed on the Kobra X yet).

Print settings:

  • PLA or PETG, 0.4 mm nozzle, 0.2 mm layers

  • No supports, no brim

  • Keep elephant-foot compensation on (about 0.1-0.15 mm) so the joints don't fuse to each other

  • After printing, flex each joint gently once to free it

Which material: PLA is fine for a keychain that mostly stays indoors. If it lives in your pocket or rides in a hot car, use PETG (PLA starts to soften around 55-60 °C).

The other animals are on their way. Follow Two Paws Workshop so you don't miss them.

Designed by us with AI help (the shapes are written as OpenSCAD code), then printed and tested for real: every photo and video here is the actual print.

Two Paws Workshop: two of us at the bench, making things that move.

Watch all twelve wiggle together on our YouTube Short: https://youtube.com/shorts/ZrqWbXjezEU

Tagi