1 / 3
Baby Bottle Drying Rack - Modular — zdjęcie 1
1 / 3

Baby Bottle Drying Rack - Modular

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A fully customizable, screw-together drying rack for baby bottles and accessories.

Ocena
0 / 5
Polubienia
1
Pobrania
4
Wydruki
0
Wyświetlenia
13
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial

This is an improved iteration of the Modular baby bottle drying rack, redesigned to address weak points (screws) and streamline the printing process (supports).

Key Improvements & Features:

Reinforced Durability: The rods and threaded sections have been thickened so they won't break or snap easily during assembly.

Hexagonal Design: The base and structural components feature a hexagonal profile, which makes bed adhesion and printing significantly easier while eliminating the need for supports.

For basic tower:

  • 1x Base         (wide or regular)

  • 1x Fork_x      (2 or 3)

  • 1x P_Fork_x   (2 or 3)

  • 1x Extension

  • 5x Rod          (or 7x)

  • 4x Screw

Recommended Print Settings:

Material: PETG is recommended, but PLA works well.
Layer Height: 0.20mm
Infill: 10% - 15% Gyroid or Grid.
Supports: None.
Brim: None (Prusaslicer, suggested brim, but with my setup it worked fine)

Tagi