Truefall: dice set by Curiosa

Seven dice (d4, d6, d8, d10, d%, d12, d20) and a hexagonal Hive case that holds all of them.
Tested on a Bambu Lab A1 mini with a 0.4 mm nozzle and white PLA.
Every file already lies on its print face: import it and print it without rotating.

Generate your dice for free : https://curiosa.tools/truefall

## Dice

- **Infill: 100 %.** The dice are designed as solid, evenly dense parts; sparse infill throws off their balance.
- **Layer height: 0.12 mm** ("0.12mm Fine"), or 0.10 mm for smoother sloped faces (about 20 % slower).
- **Supports: none.** A 3 mm brim on the d4 and d8 only if the first layer lifts.
- **Do not use "Make overhangs printable"** or any option that changes the shape: it adds material on one side.
- **Z hop:** 0.4 mm helps keep the nozzle from knocking small parts.

Optional, for cleaner faces next to the bed (Bambu Studio names):
- Process > Quality: Wall loops 3, Order of walls "inner wall/outer wall", Seam position "Aligned" or "Back".
- Process > Speed: Outer wall 60 mm/s; Slow down for overhang on.
- Filament > Cooling: Fan 100 %, Force cooling for overhang on, Layer time 8 s or more.
- Printing several dice on one plate gives each layer time to cool.

Finishing: a fine paint pen in the number pockets, wiped off the surface, makes the numbers stand out.

## Case

- **Layer height: 0.20 mm** ("0.20mm Standard"), default infill, no supports.
- Tray bottom down; lid top (pattern side) down.
- Dice pockets have 0.20 mm clearance (dice lift out freely); the lid has 0.12 mm per side, which holds the case
shut and still lifts off by hand on the A1 mini. If your printer runs tighter or looser, a light sanding inside the
lid wall loosens it.