Bonbonnière Halloween à surprise - Halloween surprise candy box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
0,31 € – 0,38 € netto (bez VAT)
Dla pliku: vis_0.4n_0.1mm_PLA_MK4SMMU3_28m.bgcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 0,35 € netto (środek widełek).
- Masa podana przez autora
- 2 g
- Czas druku podany przez autora
- 27,6 min
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Bonbonnière Halloween à surprise - Halloween surprise candy box
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 11
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Autumn & Halloween
- Licencja
- Creative Commons — Attribution
La fermeture de cette bonbonnière est assurée par un poussoir à ressort.
Vous pouvez insérer un petit fantome qui sort lorsque le trou arrive sur sa case.
Les ressorts utilisés pour le poussoir sont des ressorts de stylo de 25mm de long pour 3 mm de diamètre mais les trous font 5mm de quoi utiliser ce que vous avez sous la main.
Un fichier paramétrique freecad vous permet, sans aucune connaissance du logiciel de créer un support de ressort adapté à d'autres modèles. Pour cela modifier la valeur de la case en xxmm (ne surtout pas oublier mm) et le dessin s'adapte. Une photo des cellules correspondant aux dimensions figure dans les fichiers joints. Exportez ensuite l'objet en .stl ou .obj. Freecad est libre et gratuit, il suffit de le télécharger et de l'installer pour pouvoir ouvrir et modifier le support.
L'impression des faces de la bombonière et du fantome necessitent une imprimante multicolore.
Le couvercle a été imprimé avec des supports solubles.
====================================================================
This candy box is held shut by a spring-loaded plunger.
You can insert a small ghost that pops out when the opening aligns with its compartment.
The springs used for the plunger are 25mm long and 3mm in diameter (like those found in pens), but since the holes are 5mm wide, you can easily use whatever springs you have on hand.
A parametric FreeCAD file allows you—even without any prior knowledge of the software—to create a spring mount adapted for other models. Simply change the value in the input field to "xxmm" (be sure to include the "mm" suffix), and the design will update automatically. An image showing which fields correspond to which dimensions is included in the attached files. Once finished, export the object as an .stl or .obj file. FreeCAD is free and open-source; simply download and install it to open and modify the mount.
Printing the candy box’s decorative faces and the ghost requires a multi-color 3D printer,.
The lid was printed using soluble supports