OpenMower - PMW3901 rear-shell sensor mount (DWG)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
CAD design for adding a PMW3901 optical-flow sensor through an opening in the rear shell.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 1
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Mechanical CAD design for adding a PMW3901 optical-flow sensor to OpenMower through a small opening in the rear shell.
The original DWG is shared unchanged. It contains several components and reference geometry, as shown in the AutoCAD overview; it is not a single ready-to-slice mesh. Open it in compatible CAD software, identify the required components and export them for your printer.
Check your sensor module, shell fit, optical clearance and orientation before cutting the shell. Sensor and electronics are not included. This is not a wiring or firmware guide; no electrical compatibility, weatherproof rating or tested print profile is claimed.
File supplied: 2026.11.01 - sensore.dwg. CAD overview exported from AutoCAD. No STL export is included.