Gridfinity Holders for Einhell Power X-Change 18V Batteries (STIER Systainer)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gridfinity holders for Einhell Power X-Change (PXC) 18V batteries.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 7
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Gridfinity holders for Einhell Power X-Change (PXC) 18V batteries. I designed them for the Gridfinity insert for STIER tool containers / Systainer, but they fit any standard Gridfinity baseplate (42 mm grid).
Included parts
4 Ah holder, 3×2 units. Holds one battery lying flat. The battery sticks out about 38 mm so it’s easy to grab, and there are finger cut-outs on both long sides.
2 Ah holder, upright, 3×4 units. Holds 3 batteries standing on their long edge.
2 Ah holder, upright, 3×3 units. Holds 2 batteries standing on their long edge.
Example layout on the 9×6 STIER plate: 3× upright 3×4 holders plus 3× flat 3×2 holders give you 9× 2 Ah and 3× 4 Ah batteries in one case, and the lid closes.
Print settings
PETG or PLA
0.2 mm layer height, 3 walls, 15% infill
No supports, print feet down