Titan trolley tire rubber wheel. Titan Koffer Rad Ersatz Lauffläche aus Gummi
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement rubber wheel if the original wheels outer rubber broke. Clip on. No disassembly needed.
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 1
- Wyświetlenia
- 21
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
Hello,
my wheels of the titan trolley separated. The rubber portion came off (see picture). As the wheels are only replaceable completely with the plastic part and this was not available to me I reverted to printing a new rim out of TPU 95.
It is flexible enough to be pushed over the edge of the wheel by hand (low rim at the back of the wheel) and still stable enough to not come of during handling. Make sure to remove every leftover portion of the flexible material. But keep the black wheel portion with the studs.
If you find it useful or have some improvement to share please share your make.
wheel parameters:
diameter (silver portion of the wheel)
58.5 mm
wheel width
22.5 mm
wheel height (rubber height)
6.0 mm
Printing:
Print in TPU 95 or other flex material
Print model as provided. laying flat (first layer on the bed will later on be visible outside)
No brim nor support necessary
Make sure to have ~6 perimeter for enough material.
min. 25 infill for the rest (which shouldn't be much left)
Happy printing.