Rugged Box for Pittsburgh (Harbor Freight) Precision Screwdriver Set #47823
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I'm making some nice boxes for cheap tools so they don't get all mixed up in my toolbag.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 31
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I bought some cheap tools for work, but couldn't find a good way to carry them around in a tool bag or roll-up. Modified the rugged case that's all over the place and made an insert for the box that securely holds the tools in place. FYI, the dimensions for the box as follows:
InnerBoxDepth: 52.5
InnerBoxWidth: 130
InnerBoxBottomHeight: 18
InnerBoxLidHeight: 18
This box is for the Pittsburgh (Harbor Freight) 6 pc. Precision Screwdriver Set, Item # 47823
You might need to modify the tabs that retain the screwdrivers for your preferred fit, fortunately I have included the FreeCAD file for the insert if you want/need to make modifications or add text. The FreeCAD files for the rugged box can be found thru the remix link.
You will need: 6X M3x30mm screws per the rugged box link. Insert is a light slip fit into the box; you can either leave it loose (my preference) or glue it in place. The design of the insert is such that when the box is closed, the inserts hold eachother in place so they will not move around. The tools are retained in the inserts with strategically placed tabs. I figure over time the tabs will wear out and I'll need new inserts, so it seemed a waste to make everything one-piece and have to print the whole box again.