The Last Light Layered Haunted Ghost Scene

Bring a little Halloween atmosphere to your desk with The Last Light, a layered gothic scene featuring a friendly ghost, a crooked tree, a tiny graveyard, bats and a crescent moon.

The model is made from five separate parts: a front arch, ghost, tree scene, moon panel and base. Print each part flat in one colour, then assemble the panels in the matching slots. No AMS and no colour changes during a part are required.

The base includes a small retaining ring for a removable battery-operated LED tea light (maximum body diameter 38 mm, overall height up to 45 mm). Switch the LED on before placing it in the base. It can be lifted out from the open side. Use a battery LED only. Never use a real flame with this 3D-printed model.

Suggested colour palette:

• Arch and base: dark grey
• Ghost: white
• Tree and graveyard: burgundy
• Moon panel: blue

The crescent, stars and bats are cut-outs in the rear panel.

ASSEMBLY

Print the small fit-test piece first to check the slot tolerance on your printer. Insert the panels from front to back in this order: arch, ghost, tree, moon panel. The two tabs on each panel slide into the matching pair of slots in the base. Clean up any first-layer elephant foot before assembly; do not force the delicate tree branches.

PRINT SETTINGS 

Printer: select the printer you actually used for your successful print.
Material: PLA.
Nozzle: 0.4 mm.
Layer height: 0.20 mm.
Walls: 3.
Top/bottom layers: 4.
Base infill: 15% gyroid.
Supports: off.
Orientation: print each STL flat in its supplied orientation at 100% scale.
These are suggested settings for the model; keep the settings from your successful print if they differed. Add a tested 3MF print profile if available.

DIMENSIONS

Assembled size: approximately 120 × 90 × 135 mm.
Five main printable parts plus one small fit-test piece.
Optional battery LED tea light: body diameter up to 38 mm; overall height up to 45 mm.

--3Dwake🧡