Rokenbok Replacement Forklift Forks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
stop forkin around
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 6
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My own spin on the Rokenbok Forklift Face and Forks. I never understood why Rokenbok called it the forklift face, it's a carriage. Forklift carriage. Ugh.
All models are interchangeable with their OG Rokenbok counterparts.
The Face has been redesigned with printing in mind: Prints flat on face, and choose between more or less detail on whether or not you want to deal with supports. Both have a socket for my Add A Snap (AAS), found at the link below. You'll need to print one AAS to use this on a Forklift.
https://www.printables.com/model/1898714-rokenbok-add-a-snap
The forks themselves have been tweaked to print on their sides with the only supports needed being for their snaps. Normal generated supports tend to work fine. I've also added a little tooth on the underside of the fork tip for helping with manipulating bins that have landed funny. It definitely isn't for Loader tipping.