USB-C Cable Strain Relief Protector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Protect your USB-C charging cable from bending, fraying, and everyday wear.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 16
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
USB-C Cable Strain Relief Protector
Protect your USB-C charging cable from bending, fraying, and everyday wear with this practical 3D-printed cable protector.
Designed specifically for Apple's braided 240W USB-C charging cable, this two-piece protector reinforces the vulnerable area where the cable meets the connector, helping extend its lifespan.
Key Features
Snap-Fit Design – Two-piece construction with four locking clips. No glue or screws required.
Bend Protection – Reduces sharp bending near the connector.
Cable-Friendly Shape – Smooth, rounded edges help distribute bending stress.
Easy Installation – Attaches to an existing cable without disconnecting or modifying the connector.
Support-Free Printing – Designed for simple 3D printing without supports.
Recommended Print Settings
Material: PETG or TPU
Layer Height: 0.2 mm
Nozzle: 0.4 mm
Wall Loops: 3
Infill: 15%
Supports: Not required
Compatibility
Designed for Apple's braided USB-C 240W charging cable. Compatibility with other USB-C cables may vary depending on connector dimensions.
Note: This protector is intended to reduce mechanical stress on the cable. It cannot repair damaged internal wires or guarantee protection against future cable failure.