Halloween coffin candy/Skittles dispenser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A scary candydispenser for halloween, made for skittles
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 16
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Autumn & Halloween
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a candy dispenser for halloween when you arent at home and still want the kids to get some sweets and have a little fun. It is designed for skittles but I guess it will work whith other similar sized sweets.
Assembily Instuctions
Glue the gravestone on the coffin so the holes in the walls lign up
Put the seasaw on the pin inside the coffin
Place the first part of the axle (the one whith the hand) on the indentations
Pass the second part of the axle (the one whith the bone on the end) through the hole in the wall of the coffin and press in the first part of the axle. Use some glue if required
Cut a 32mm long piece of the filament which you used for the coffin and guide it thru the lid pf the coffin. Then you can pull it back a little bit at the hole were you can see the filament and place the lid in the joint of the coffin.